Mini-Workshop on Design Challenges of Small Angle IR

Europe/Zurich
Building 200 - room 101 (LAL 0rsay)

Building 200 - room 101

LAL 0rsay

Université de Paris XI
Olivier Napoly (CEA/Saclay), Philip Bambade (Laboratoire de l''Accelerateur Lineaire (LAL) (IN2P3) (LAL))
Description
This workshop aims at reviewing the design of the head-on and 2 mrad IR beam lines, and at identifying the main magnet hardware challenges. Supported by the ELAN networking activity under the FP6 CARE project
agenda
List of Participants
Poster
    • 9:00 AM 9:05 AM
      Welcome Building 200 - room 101

      Building 200 - room 101

      LAL 0rsay

      Université de Paris XI
    • 9:05 AM 10:15 AM
      Session I : General Design Issues Building 200 - room 101

      Building 200 - room 101

      LAL 0rsay

      Université de Paris XI
      • 9:05 AM
        Physics and Collider Motivations for Small-Angle IR 25m
        Speaker: Dr Philip Bambade (LAL Orsay)
        Slides
      • 9:30 AM
        Final Focus: Design Principles and Optimisation 15m
        Speaker: Dr Jacques Payet (CEA Saclay)
        Slides
      • 9:45 AM
        Collimation Requirements 15m
        Speaker: Dr Franck Jackson (CCLRC Daresbury)
        Slides
      • 10:00 AM
        Extraction Beam Line: Design Principles 15m
        Speaker: Dr Rob Appleby (University of Manchester)
        Slides
    • 10:15 AM 10:45 AM
      Coffee break 30m Building 200 - room 101

      Building 200 - room 101

      LAL 0rsay

      Université de Paris XI
    • 10:45 AM 12:30 PM
      Session II : 2 mrad Beam Line Design Building 200 - room 101

      Building 200 - room 101

      LAL 0rsay

      Université de Paris XI
      • 10:45 AM
        Design Challenges of the 2 mrad Scheme 20m
        Speaker: Dr Olivier Napoly (CEA)
        Slides
      • 11:05 AM
        Final Doublet Optimisation 20m
        Speaker: Dr Rob Appleby (University of Manchester)
        Slides
      • 11:25 AM
        Limits of SC Final Doublets Magnets 20m
        Speaker: Dr Gian Luca Sabbi (LBL)
        Slides
      • 11:45 AM
        Discussion: Identification of hardware challenges and design improvements 45m
        Slides
    • 12:30 PM 2:00 PM
      Lunch 1h 30m Building 200 - room 101

      Building 200 - room 101

      LAL 0rsay

      Université de Paris XI
    • 2:00 PM 4:05 PM
      Session III: Head-on Beam Line Design Building 200 - room 101

      Building 200 - room 101

      LAL 0rsay

      Université de Paris XI
      • 2:00 PM
        Design Challenges of the Head-on Scheme 20m
        Speaker: Mrs Deepa Angal-Kalinin (CCLRC Daresbury)
        Slides
      • 2:20 PM
        Status of the Extraction Beam Line 20m
        By phone
        Speaker: Dr Lewis Keller (SLAC)
        Slides
      • 2:40 PM
        Limits of the Electrostatic Separators 20m
        Speaker: Dr Johannes Borburgh (CERN)
        Slides
      • 3:00 PM
        Limits of RF Deflectors 20m
        Speaker: Dr Yoshihisa Iwashita (Kyoto University)
        Slides
      • 3:20 PM
        Discussion: Identification of hardware challenges and design improvements 45m
    • 4:05 PM 4:30 PM
      Coffee break 25m Building 200 - room 101

      Building 200 - room 101

      LAL 0rsay

      Université de Paris XI
    • 4:30 PM 5:30 PM
      Session IV: Prospects fot the Two Schemes Building 200 - room 101

      Building 200 - room 101

      LAL 0rsay

      Université de Paris XI
      • 4:30 PM
        Comparison of Design Difficulties and Performance 15m
        Speaker: Mrs Deepa Angal-Kalinin (CCLRC Daresbury)
      • 4:45 PM
        Minimal Extraction Scheme 5m
        Speaker: Mrs Deepa Angal-Kalinin (CCLRC Daresbury)
      • 4:50 PM
        Discussion 40m
    • 8:00 PM 10:00 PM
      Workshop Dinner 2h Restaurant

      Restaurant

      LAL 0rsay

      Université de Paris XI