Name: ATF2 weekly meeting
Start: 2009-06-17T14:30:00+09:00
End: 2009-06-17T16:30:00+09:00
Location: No location set

- International phone/webex meeting
  - 1
    Monalisa schedule in this summer
    
    Discussion and decision of the schedule with Today's Monalisa status
    
    Speakers: Dr Andrea Jeremie (LAPP), Dr David urner (University of Oxford)
    
    a) Present Status of Monalisa
    
    Speakers: Dr David urner (University of Oxford), Dr Paul Coe (John Adams Institute for Accelerator Science, University of Oxford)
    
    Slides
  - 2
    Update of ATF2 priorities and schedule
    
    Speakers: Dr Andrei Seryi (SLAC), Philip Bambade (Laboratoire de l''Accelerateur Lineaire (LAL) (IN2P3) (LAL))
    
    Draft schedule Summer-Winter 09
    
    Draft schedule Summer-Winter 09-pdf
    
    P.Bambade's file
    
    T.Tauchi's file
    
    a) Stripline BPM issues
    
    Speaker: Dr Toshiaki Tauchi (KEK)
    
    Slides
- KEK site meeting (Japanese)
  - 3
    
    Progress of Shintake monitor work
    
    Speakers: Mr Masahiro OROKU (Tokyo Univ.), Mr Takashi Yamanaka (The University of Tokyo)
    
    Slides
    
    Time: 17:00 (JST) - Site: ATF LC container meeting room (KEK) Participants: Terunuma, Tauch, Okugi, Yamanaka, Oroku * Damage threshold of optics - Sigma Koki optics now used in IP-BSM reach limit when EXT LW laser is used. -> if the replacement of optics is needed, they should be done in this summer shutdown. - need to prepare laser dump before making transport line * Laser transport line from EXT LW - It is no problem with Aryshev's plan * Injection to the Shintake monitor optical table - inject from the north side of the table in beam height (EXT LW laser height is already in beam height) - attach horizontally movalble mirror to switch the EXT LW laser and the present laser * Slit of knife edge - should care not only the roughness but also the uniformity of the edge * Detector upgrade - install gain monitor to calibrate the light correction efficiensy of all blocks of scintillator - make new housing for nitrogen parge - make fan for stabilize temparature * Schedule - should make a schedule during the summer shutdown - should place priority on making screen monitor and so on rather than making the laser transport from EXT LW