Second ATF2 Project Meeting
from
Tuesday, May 30, 2006 (9:00 AM)
to
Thursday, June 1, 2006 (5:00 PM)
Monday, May 29, 2006
Tuesday, May 30, 2006
9:00 AM
Registration
9:00 AM - 9:30 AM
Room: Meeting room, 1F, 3-gokan
9:30 AM
Greeting by J. Urakawa
Greeting by J. Urakawa
9:30 AM - 9:40 AM
Room: Meeting room, 1F, 3-gokan
Introduction
9:30 AM - 10:00 AM
Room: Meeting room, 1F, 3-gokan
9:40 AM
Overview and meeting plan by T.Tauchi and A. Seryi
Overview and meeting plan by T.Tauchi and A. Seryi
9:40 AM - 10:00 AM
Room: Meeting room, 1F, 3-gokan
10:00 AM
Final optimization of optics by M.Woodley
Final optimization of optics by M.Woodley
10:00 AM - 10:40 AM
Room: Meeting room, 1F, 3-gokan
Optics and Layout
10:00 AM - 12:00 PM
Room: Meeting room, 1F, 3-gokan
10:40 AM
Summary of tolerances for magnets by S.Kuroda
Summary of tolerances for magnets by S.Kuroda
10:40 AM - 10:50 AM
Room: Meeting room, 1F, 3-gokan
10:50 AM
Layout and conventional facility by J.Urakawa and N.Terunuma
Layout and conventional facility by J.Urakawa and N.Terunuma
10:50 AM - 11:30 AM
Room: Meeting room, 1F, 3-gokan
11:30 AM
Optimization of the band width by A.Seryi
Optimization of the band width by A.Seryi
11:30 AM - 11:40 AM
Room: Meeting room, 1F, 3-gokan
11:40 AM
Discussion
Discussion
11:40 AM - 12:00 PM
Room: Meeting room, 1F, 3-gokan
12:00 PM
Lunch
12:00 PM - 1:30 PM
Room: Meeting room, 1F, 3-gokan
1:30 PM
CLIC table for the FD system by P.Bambade
CLIC table for the FD system by P.Bambade
1:30 PM - 1:50 PM
Room: Meeting room, 1F, 3-gokan
IP configuration
1:30 PM - 3:30 PM
Room: Meeting room, 1F, 3-gokan
1:50 PM
IP Layout by T.Okugi
IP Layout by T.Okugi
1:50 PM - 2:10 PM
Room: Meeting room, 1F, 3-gokan
magnet configuration, QBPMs, beam pipe, movers
2:10 PM
Active supports for the FD system and Shintake monitor by R. Sugahara
Active supports for the FD system and Shintake monitor by R. Sugahara
2:10 PM - 2:30 PM
Room: Meeting room, 1F, 3-gokan
2:30 PM
Passive support for Shintake monitor by T. Kume
Passive support for Shintake monitor by T. Kume
2:30 PM - 2:50 PM
Room: Meeting room, 1F, 3-gokan
2:50 PM
Stabilization between the above two ( by StaFF ), by D.Urner
Stabilization between the above two ( by StaFF ), by D.Urner
2:50 PM - 3:10 PM
Room: Meeting room, 1F, 3-gokan
3:10 PM
Discussion
Discussion
3:10 PM - 3:30 PM
Room: Meeting room, 1F, 3-gokan
3:30 PM
coffee break
3:30 PM - 4:00 PM
Room: Meeting room, 1F, 3-gokan
4:00 PM
Design of Magnets: FD, Bends, Sextupoles , by C.Spencer
Design of Magnets: FD, Bends, Sextupoles , by C.Spencer
4:00 PM - 4:30 PM
Room: Meeting room, 1F, 3-gokan
Production and Installation Policy (1)
4:00 PM - 6:10 PM
Room: Meeting room, 1F, 3-gokan
4:30 PM
Field measurement of QEA magnets, by M.Masuzawa
Field measurement of QEA magnets, by M.Masuzawa
4:30 PM - 4:50 PM
Room: Meeting room, 1F, 3-gokan
4:50 PM
Magnet support system, by R.Sugahara
Magnet support system, by R.Sugahara
4:50 PM - 5:10 PM
Room: Meeting room, 1F, 3-gokan
5:10 PM
Vibration measurement of FFTB movers, by H.Yamaoka
Vibration measurement of FFTB movers, by H.Yamaoka
5:10 PM - 5:30 PM
Room: Meeting room, 1F, 3-gokan
5:30 PM
QBPM and IP-BPM, by Y.Honda
QBPM and IP-BPM, by Y.Honda
5:30 PM - 5:50 PM
Room: Meeting room, 1F, 3-gokan
5:50 PM
Electronics, by M.Ross
Electronics, by M.Ross
5:50 PM - 6:10 PM
Room: Meeting room, 1F, 3-gokan
Wednesday, May 31, 2006
9:00 AM
Commissioning detailed plan
9:00 AM - 11:00 AM
Room: Meeting room, 1F, 3-gokan
Hardwares for the commisioning by T. Okugi
Hardwares for the commisioning by T. Okugi
9:00 AM - 11:00 AM
Room: Meeting room, 1F, 3-gokan
discussion
11:00 AM
coffee break
11:00 AM - 11:20 AM
Room: Meeting room, 1F, 3-gokan
11:20 AM
Production and Installation Policy (2)
11:20 AM - 12:20 PM
Room: Meeting room, 1F, 3-gokan
Specification of bulk power supply, module and controller etc. by P.Bellomo
Specification of bulk power supply, module and controller etc. by P.Bellomo
11:20 AM - 11:50 AM
Room: Meeting room, 1F, 3-gokan
11:50 AM
Role sharing between KEK and SLAC , by M.Kumada
Role sharing between KEK and SLAC , by M.Kumada
11:50 AM - 12:20 PM
Room: Meeting room, 1F, 3-gokan
12:20 PM
Lunch
12:20 PM - 1:30 PM
Room: Meeting room, 1F, 3-gokan
1:30 PM
Laser facility for photon collider by T.Takahashi
Laser facility for photon collider by T.Takahashi
1:30 PM - 2:00 PM
Room: Meeting room, 1F, 3-gokan
Production and Installation Policy (3)
1:30 PM - 3:50 PM
Room: Meeting room, 1F, 3-gokan
2:00 PM
Fast feedback(FONT) and feedforward system by P.Burrows
Fast feedback(FONT) and feedforward system by P.Burrows
2:00 PM - 2:30 PM
Room: Meeting room, 1F, 3-gokan
2:30 PM
Laserwire system by D.Howell
Laserwire system by D.Howell
2:30 PM - 3:00 PM
Room: Meeting room, 1F, 3-gokan
3:00 PM
Shintake monitor by T.Suehara
Shintake monitor by T.Suehara
3:00 PM - 3:30 PM
Room: Meeting room, 1F, 3-gokan
3:30 PM
Resonant cavity type monitor for future option by Y.Honda
Resonant cavity type monitor for future option by Y.Honda
3:30 PM - 3:50 PM
Room: Meeting room, 1F, 3-gokan
3:50 PM
coffee break
3:50 PM - 4:10 PM
Room: Meeting room, 1F, 3-gokan
4:10 PM
Feeback and feedforward systems by P. Burrows
Feeback and feedforward systems by P. Burrows
4:10 PM - 4:25 PM
Room: Meeting room, 1F, 3-gokan
Scheduling strategy
4:10 PM - 6:10 PM
Room: Meeting room, 1F, 3-gokan
4:25 PM
Fast kicker for the ILC bunch train structure by T. Naito
Fast kicker for the ILC bunch train structure by T. Naito
4:25 PM - 4:40 PM
Room: Meeting room, 1F, 3-gokan
4:40 PM
Laser-wire by G.Blair
Laser-wire by G.Blair
4:40 PM - 4:55 PM
Room: Meeting room, 1F, 3-gokan
4:55 PM
Shintake System by T.Suehara
Shintake System by T.Suehara
4:55 PM - 5:10 PM
Room: Meeting room, 1F, 3-gokan
5:10 PM
IP-BPM and BSM with laser cavity by Y. Honda
IP-BPM and BSM with laser cavity by Y. Honda
5:10 PM - 5:25 PM
Room: Meeting room, 1F, 3-gokan
5:25 PM
Discussion
Discussion
5:25 PM - 6:10 PM
Room: Meeting room, 1F, 3-gokan
6:10 PM
Banquet
6:10 PM - 8:10 PM
Room: Meeting room, 1F, 3-gokan
Thursday, June 1, 2006
9:00 AM
ATF operation during construction and extraction line modifications
9:00 AM - 11:00 AM
Room: Meeting room, 1F, 3-gokan
R&D program at ATF during the ATF2 construction, by P.Burrows
R&D program at ATF during the ATF2 construction, by P.Burrows
9:00 AM - 11:00 AM
Room: Meeting room, 1F, 3-gokan
Discussion, may need agreement - proposal to the ICB?, Vancouver, July 2006?
9:45 AM
Laserwire by G.Blair
Laserwire by G.Blair
9:45 AM - 9:50 AM
Room: Meeting room, 1F, 3-gokan
9:50 AM
Cavity BPM by Y. Honda
Cavity BPM by Y. Honda
9:50 AM - 9:55 AM
Room: Meeting room, 1F, 3-gokan
9:55 AM
MonALiSA by D.Urner
MonALiSA by D.Urner
9:55 AM - 10:00 AM
Room: Meeting room, 1F, 3-gokan
10:00 AM
Compton laser cavity, by T.Omori
Compton laser cavity, by T.Omori
10:00 AM - 10:05 AM
Room: Meeting room, 1F, 3-gokan
10:05 AM
ODR by P.Karataev
ODR by P.Karataev
10:05 AM - 10:10 AM
Room: Meeting room, 1F, 3-gokan
11:00 AM
Magnet and Support, by C.Spencer, R.Sugahara (M.Ross)
Magnet and Support, by C.Spencer, R.Sugahara (M.Ross)
11:00 AM - 11:05 AM
Room: Meeting room, 1F, 3-gokan
Summary
11:00 AM - 12:00 PM
Room: Meeting room, 1F, 3-gokan
convened by A.Seryi
convened by A.Seryi
11:00 AM - 12:00 PM
Room: Meeting room, 1F, 3-gokan
Brief summaries are requested to the session conveners.
11:05 AM
Powe Supply, P.Bellomo, M.Kumada (M.Ross)
Powe Supply, P.Bellomo, M.Kumada (M.Ross)
11:05 AM - 11:10 AM
Room: Meeting room, 1F, 3-gokan
11:10 AM
Laser, feedback/feedforward, by Y.Honda (M.Ross)
Laser, feedback/feedforward, by Y.Honda (M.Ross)
11:10 AM - 11:15 AM
Room: Meeting room, 1F, 3-gokan
11:15 AM
Optics and Layout, by A.Seryi
Optics and Layout, by A.Seryi
11:15 AM - 11:20 AM
Room: Meeting room, 1F, 3-gokan
11:20 AM
IP configuration, by P.Bambade
IP configuration, by P.Bambade
11:20 AM - 11:25 AM
Room: Meeting room, 1F, 3-gokan
11:25 AM
Commissionng Detailed Plan, by T.Okugi
Commissionng Detailed Plan, by T.Okugi
11:25 AM - 11:30 AM
Room: Meeting room, 1F, 3-gokan
11:30 AM
Scheduling Strategy, by G.Blair
Scheduling Strategy, by G.Blair
11:30 AM - 11:35 AM
Room: Meeting room, 1F, 3-gokan
11:35 AM
ATF operation during construction and extraction line modifications, by P.Burrows
ATF operation during construction and extraction line modifications, by P.Burrows
11:35 AM - 11:40 AM
Room: Meeting room, 1F, 3-gokan
11:40 AM
Production and Installation Policy Session by M.Ross
Production and Installation Policy Session by M.Ross
11:40 AM - 11:45 AM
Room: Meeting room, 1F, 3-gokan
12:00 PM
Lunch
12:00 PM - 1:30 PM
Room: Meeting room, 1F, 3-gokan
1:30 PM
Closed session on budgets
1:30 PM - 3:30 PM
Room: Meeting room, 1F, 3-gokan