Friday Morning Machine setup for 400 bunches @ 1MHz, 1.2nC/bunch

Friday Afternoon Machine setup Piezo studies

Friday Night Vector Sum calibration Pk/Ql studies - model validation/calibration

Saturday Morning Detuning measurements from field decay and scan of rf flat-top length Compare online computation with measurement from field decay Piezo studies

Saturday Afternoon Machine tuning - increase charge to 1.6nC/bunch

Saturday Night Pk/Ql studies - set up flat gradients at 1.6mA

Sunday Morning Detuning measurements Piezo tuner setup for LFD compensation Vibration studies using piezos

Sunday Afternoon Machine tuning for higher charge Set up lower gradients on ACC67 with beam

Sunday Night Pk/Ql studies - set up flat gradients at 1.7mA, 200MeV vector sum on ACC67

Monday Morning Reconfigure drive laser for 3MHz bunch rate Reconfigure machine for 5Hz operation

Monday Afternoon Machine setup, tuning with 3MHz bunch rate

Monday Night Pk/Ql studies - flatten gradients with 3mA, 200MeV Vector Sum for ACC67 Scan beam current up to 5mA with Pk/Ql optimized for 3mA

Tuesday Morning Continue characterizing Pk/Ql study with flat gradients at 3mA Ql Perturbation measurements around 3mA working point First attempt to iteratively optimize Qls around reference working point

Tuesday Afternoon Set up machine for higher gradient operation on ACC67 Pk/Ql studies - flatten gradients at 4.2mA with 300MeV Vector Sum for ACC67

Tuesday Night Pk/Ql studies - flatten gradients at 4.2mA, 300MeV on ACC67 Evaluate iterative procedure for optimizing Ql settings at 4.2mA working point