Conveners
Vtx and Si Tracking
- Yasuhiro Sugimoto (KEK)
- Ivan Vila (IFCA (CSIC-UC))
- Marcel Vos (IFIC (UVEG/CSIC) Valencia)
- Marc Winter (Institut Pluridisciplinaire Hubert Curien (FR))
Vtx and Si Tracking: ..
- Marc Winter (Institut Pluridisciplinaire Hubert Curien (FR))
- Yasuhiro Sugimoto (KEK)
- Ivan Vila (IFCA (CSIC-UC))
- Marcel Vos (IFIC (UVEG/CSIC) Valencia)
Vtx and Si Tracking: ...
- Ivan Vila (IFCA (CSIC-UC))
- Yasuhiro Sugimoto (KEK)
- Marc Winter (Institut Pluridisciplinaire Hubert Curien (FR))
- Marcel Vos (IFIC (UVEG/CSIC) Valencia)
Vtx and Si Tracking: ....
- Marc Winter (Institut Pluridisciplinaire Hubert Curien (FR))
- Ivan Vila (IFCA (CSIC-UC))
- Marcel Vos (IFIC (UVEG/CSIC) Valencia)
- Yasuhiro Sugimoto (KEK)
Description
Vidyo Link https://goo.gl/Rr89Y7
-
Fernando Duarte Ramos (CERN)31/05/2016, 09:00The CLIC detector tracking system is currently composed of a vertex detector with three double-sided layers of silicon detectors on both the barrel and forward regions and a silicon tracker consisting of six barrel layers and four/seven endcap disks on the outer/inner tracker subsystems, respectively. The strict requirements in terms of material budget (2 x 0.2% X0 per vertex double layer...Go to contribution page
-
Miguel-Angel Villarejo Bermudez (Instituto de Fisica Corpuscular (ES))31/05/2016, 09:30In this contribution a novel cooling concept for light-weight position-sensitive detectors is proposed. Our solution is based on a micro-channel cooling circuit that is integrated in the silicon sensor. Results are presented of a characterization of the cooling performance of several mechanical samples fabricated at HLL in Munich. A moderate flow of order 1 l/h of mono-phase cooling liquid is...Go to contribution page
-
DAVID MOYA MARTIN (IFCA), David Moya Martin (IFCA - Instituto de Fisica de Cantabria-Consejo Sup. de Invest)31/05/2016, 10:00The accurate monitoring of environmental humidity inside the tracker envelop is of extreme importance in order to assure the good performance of the detector (for detecting leakage in the cooling circuits or other tracker failures involving a reduction of the environmental dryness). So is the control of electronic and sensor temperature (for detecting bad performance of the cooling system,...Go to contribution page
-
Miguel-Angel Villarejo Bermudez (Instituto de Fisica Corpuscular (ES))31/05/2016, 11:00The current generation of solid-state position sensitive devices has better precision, greater integration and less material than previous generations of detectors. Detector solutions have been developed for 50 micron thin, small-pixel sensors with a resolution of a few microns. Ultra-thin sensors require new concepts for mechanical support that maintain good thermo-mechanical performance at a...Go to contribution page
-
Ms Mar Carulla (IMB-CNM (CSIC))31/05/2016, 11:30This presentation introduces the latest technological development on the Inverse Low Gain Avalanche Detector (iLGAD). This structure is based on the standard Avalanche Photo Diodes (APD) concept that includes an internal multiplication of the charge generated by radiation. The multiplication is inherent to the basic n ++ -p + -p structure, where the doping profile of...Go to contribution page
-
Dr Oscar Alonso (University of Barcelona)31/05/2016, 12:00Silicon micro-strips detectors are the baseline for the tracker region of the future International Linear Collider (ILC). Nevertheless, variations of this type of sensors like resistive micro-strips or more innovative detectors like Low Gain Avalanche Detectors (LGADs) have been presented as possible candidates thanks to some of their advantages, like 2-D positioning in the cases of the...Go to contribution page
-
Marko gerhart Dragicevic (Institut fuer Hochenergiephysik (HEPHY))31/05/2016, 12:30Most modern particle physics experiments use silicon based sensors for their tracking systems. These sensors are able to detect particles generated in high energy collisions with high spatial resolution and therefore allow the precise reconstruction of particle tracks. The same technology now also becomes used as the active sensor in calorimeters. Today, only a few vendors are capable of...Go to contribution page
-
Laci Andricek (Werner-Heisenberg-Institut - Max-Planck-Institut fur Physik)01/06/2016, 09:00The DEPFET collaboration is in the final construction phase of a highly granular, ultra-transparent active pixel detector for high-performance vertex reconstruction at the Belle II experiment, KEK, Japan. A complete detector system is being developed, including solutions for ultra-thin sensors and their mechanical support, r/o ASICs, cooling, services, and a DAQ system capable of handling the...Go to contribution page
-
Carlos Marinas (University of Bonn)01/06/2016, 09:30The DEPFET collaboration is building a highly granular, ultra-transparent active pixel detector for high-performance vertex reconstruction at the Belle II experiment in the new super flavour factory in Japan. A complete detector system is being produced, including solutions for ultra-thin sensors and their mechanical support and cooling, front-end electronics, services and a DAQ...Go to contribution page
-
Dr Auguste Besson (IPHC Strasbourg)01/06/2016, 10:00The DBD requirements for the ILD vertex detector refer to the 500 GeV running assuming the use of an anti-DID to mitigate the beam related background in the vertex detector. They do not incorporate a luminosity upgrade nor do they explicitly target a highly efficient low momentum tracking and a suppressed fake track rate. Test results of CMOS pixel sensors showed that the DBD...Go to contribution page
-
Marcos Fernandez Garcia (Instituto de Fisica de Cantabria, Grupo de Altas Energias - Cons)01/06/2016, 11:00Very recently, an innovative Transient Current Technique was introduced where the free charge carriers are created in a Two-Photon-Absorption (TPA) process induced by a focused femto-second laser pulse with a wavelength of 1300nm. The fact that in a TPA process the absorption of the light depends on the square of the intensity of the light beam used for the current generation allows a...Go to contribution page
-
Dr Daniel Hynds (CERN)01/06/2016, 11:30As part of the R&D towards the CLIC vertex detector, many different technologies are being investigated. The current expectation is for a hybrid pixel detector, with the readout ASIC either bump-bonded to slim-edge planar silicon sensors or glued to “active" HV-CMOS sensors. The first generation of capacitively coupled assemblies for CLIC were tested extensively during 2015, and served as...Go to contribution page
-
Andreas Matthias Nurnberg (CERN)01/06/2016, 12:00The physics aims at the future CLIC high-energy linear e+e- collider set very high precision requirements on the performance of the tracking detectors. Moreover, these detectors have to be well adapted to the experimental conditions, such as the time structure of the collisions and the presence of beam-induced backgrounds. A single-point resolution of 3 um in the vertex detector and 7 um in...Go to contribution page
-
Fernando Arteche (Instituto Tecnológico de Aragón)01/06/2016, 12:30The control of electromagnetic interference (EMI) phenomena is a very important aspect of any electronic device in order to ensure the correct performance of a whole physics experiment. This aspect is particularly important in the future tracker systems, due to the problems that may appear as a result of the proximity of noise sources to high sensitive modules, fast transients and...Go to contribution page