Fifth ATF2 Project Meeting

Asia/Tokyo
Seminar Hall, 3-Go-Kan (KEK)

Seminar Hall, 3-Go-Kan

KEK

Andrei Seryi (SLAC), Toshiaki Tauchi (KEK)
Description
At this meeting, we would like to focus on the installation schedule and preparation for commissioning as well as status reports. Aslo, we would like to discuss on the detailed plan in 2008 and in future.
Group Photo
Home Page
webex-19Dec
webex-20Dec
webex-21Dec
    • Registration at the meeting room Seminar Hall, 3-Go-Kan

      Seminar Hall, 3-Go-Kan

      KEK

      Registration fee 1,000yen and Banquet (Forget-The-Year Party) fee about 5,000yen

    • Introduction Seminar Hall, 3-Go-Kan

      Seminar Hall, 3-Go-Kan

      KEK

      • 1
        Greeting
        Speaker: Prof. Junji Urakawa (KEK)
      • 2
        Goals and things to be decided at the meeting
        Speaker: Dr Andrei Seryi (SLAC)
        Slides
    • Conventional facilities and construction schedule Seminar Hall, 3-Go-Kan

      Seminar Hall, 3-Go-Kan

      KEK

      Detailed floor plan ( entrances, power supply system, electronics for instrumentation and laser huts );
      Re-configuration of ATF extraction line

      • 3
        CF schedule and re-configuration in summer 2008
        Speaker: Nobuhiro Terunuma (KEK)
        Slides
    • 10:40
      coffee break Seminar Hall, 3-Go-Kan

      Seminar Hall, 3-Go-Kan

      KEK

    • Hardware/devices for commissioning Seminar Hall, 3-Go-Kan

      Seminar Hall, 3-Go-Kan

      KEK

      the final v3.7 optics and answers from the homework issues;
      Minimal device-configuration for the commissioning, October 2007;
      - vacuum system, spaces for hardware, interfaces (to ATF control system) and responsibilities
      - remote participation

      • 4
        v3.8 optics and answers from homework issues
        Speaker: Mark Woodley (SLAC)
        more information
        Slides
      • 5
        commissiong hardwares and IP configuration
        Speaker: Dr Toshiyuki Okugi (KEK)
        Slides
      • 6
        Proposal of SLAC contribution to the control system software effort
        Speaker: Dr Glen White (SLAC)
        Slides
      • 7
        Discussion of the interactive optics control system for ATF2
        Speaker: all
        Slides
    • 12:00
      lunch Seminar Hall, 3-Go-Kan

      Seminar Hall, 3-Go-Kan

      KEK

    • Commissioning and Tuning (1) Seminar Hall, 3-Go-Kan

      Seminar Hall, 3-Go-Kan

      KEK

      • 8
        Using TBT data at ATF DR
        Speaker: Eliana Gianfelice-Wendt (FNAL)
        Slides
      • 9
        Extraction line + Final Focus System beam-based alignment and IP spot-size tuning
        Speaker: Dr Glen White (SLAC)
        Slides
      • 10
        Orbit Control and beam-based feedback in EXT and FFS Studies
        Speaker: Dr Glen White (SLAC)
      • 11
        ATF2 as a test bench for CLIC BDS tuning, also
        Speaker: Dr Rogelio Tomas (CERN)
        Slides
      • 12
        Expected ground motion at ATF2 and resulting effects at IP
        Speaker: Mr Yves Renier (LAL)
        Slides
      • 13
        Discussion
        Speaker: All
    • Instrumentation Seminar Hall, 3-Go-Kan

      Seminar Hall, 3-Go-Kan

      KEK

      QBPM system ( installation, electronics ) including s-band BPM;
      FONT, Feedforward and ZC systems;
      LW system;
      New Shintake monitor (BSM), IPBPM and gamma detector;
      IP-BPM;
      Nano pattern target at IP

      • 14
        QBPM: Testing, Installation and Commissioning
        Latest testing of QBPM system, preparation for installation and commissioning
        Speakers: Doug McCormick (SLAC), Mr Justin May (SLAC)
        Slides
      • 15
        DR RingBPM Upgrade: Status and Plan for Commissioning
        Introduction and summary of damping ring BPM upgrade program. Discussion of interaction between DR BPM upgrade commissioning and ATF2 commissioning.
        Speakers: Mr Justin May (SLAC), Ms Tonee Smith (SLAC)
        Slides
      • 16
        S-Band BPM Progress
        Summary of recent development and tests of S-Band BPM and electronics
        Speaker: Dr Stewart Boogert (Royal Holloway, University of London)
      • 17
        FONT: R&D Status
        Results and progress of FONT R&D program
        Speaker: Prof. Philip Burrows (Oxford University)
        Slides
      • 18
        FONT @ ATF2
        Development and plans for FONT systems in the ATF2 system
        Speaker: Dr Javier Resta Lopez (JAI, Oxford University)
        Slides
      • 19
        Testing and development of feed-forward systems for ATF2
        Summary of progress and upcoming tests and plans for feed-forward instrumentation and operation in ATF2
        Speaker: Dr Alexander Kalinin (ASTEC Daresbury Laboratory CCLRC UK)
        Slides
      • 20
        LaserWire Program @ ATF2
        Progress and planning for the laser wire instrumentation at ATF2, including testing in the ATF extraction line
        Speakers: Dr David Howell (Oxford), Mr Lawrence Deacon (Royal Holloway), Dr Stewart Boogert (Royal Holloway, University of London)
        Slides
      • 21
        Shintake BSM and gamma detector
        Discussion of testing and planning for Shintake monitor in ATF2; including discussion of gamma detectors
        Speakers: Mr Masahiro OROKU (postgraduate), Mr Takashi Yamanaka (The University of Tokyo), Dr Yosuke Honda (KEK)
      • 22
        IP-BPM; Progress and Planning
        Update on testing and planning for IP-BPM in ATF2
        Speakers: Tomoya Nakamura (Tokyo University), Dr Yosuke Honda (KEK)
        Slides
      • 23
        IP Nano-Pattern Target
        Summary of progress and discussion of IP pattern target for ATF2
        Speaker: Dr Yosuke Honda (KEK)
        Slides
    • 15:30
      coffee break Seminar Hall, 3-Go-Kan

      Seminar Hall, 3-Go-Kan

      KEK

    • Magnets, movers and magnet installation Seminar Hall, 3-Go-Kan

      Seminar Hall, 3-Go-Kan

      KEK

      Status of new dipoles, new sextupoles and modification of QC3s for FD, including magnetic field measurements;
      Status of magnet support systems and their installation;
      Recent measurements of magnet vibrations at ATF2;
      Status of the magnet movers.

      • 24
        Status of the new dipoles, sextupoles and modified old QC3 quads
        Recent fabrication progress on several new ATF2 magnets; magnetic measurements of them. Approximate schedule for installation in beamline.
        Speaker: Dr Cherrill Spencer (SLAC)
        Slides
      • 25
        Status and plan for the ATF2 magnets installation
        Progress on installation of concrete supports blocks, some magnets and their movers. Plan for future installations.
        Speaker: Mr Ryuhei Sugahara (KEK)
        Slides
      • 26
        Recent measurements of vibrations of magnets at ATF2.
        Speaker: Mr Ryuhei Sugahara (KEK)
        Slides
      • 27
        Status of magnet movers that have come from SLAC- their controlling system
        Progress report on the development of the controlling system for the magnet movers; schedule for its installation and the movers' installation in the beamline.
        Speaker: Mr Justin May (SLAC)
        Slides
      • 28
        Discussion about installation schedule for all magnets & their supports & movers
        Further discussions about schedules for the completion of magnet fabrication; measurements; transportation of magnets between SLAC, LAPP, KEK; installation in beamline scheduling; coordination with power supplies installation.
    • 11:00
      coffee break Seminar Hall, 3-Go-Kan

      Seminar Hall, 3-Go-Kan

      KEK

    • Power supply Seminar Hall, 3-Go-Kan

      Seminar Hall, 3-Go-Kan

      KEK

      Power Supply Status and Commissioning Schedule;
      Magnetic field stability issue

      • 29
        Power Supply Status and Schedule
        Discuss the progress of the dc magnet high availability power supplies and preparation for commissioning.
        Speaker: Briant Lam (SLAC)
        Slides
      • 30
        Magnetic Field Stability Issue
        Speaker: Dr masayuki kumada (nirs)
        Slides
    • 12:00
      lunch Seminar Hall, 3-Go-Kan

      Seminar Hall, 3-Go-Kan

      KEK

    • ATF/ATF2 tour Seminar Hall, 3-Go-Kan (Assembly hall)

      Seminar Hall, 3-Go-Kan

      Assembly hall

    • Commissioning and Tuning (2) Seminar Hall, 3-Go-Kan

      Seminar Hall, 3-Go-Kan

      KEK

      • 31
        Vertical emittance growth due to non-linearity in the ATF EXT
        Speaker: Maria del Carmen Alabau (IFIC (Valencia) - LAL (Orsay))
        Slides
      • 32
        Emittance measurements with multiple wire-scanners and quadrupole scans
        Speakers: Dr Cecile Rimbault (LAL), Dr Julien Brossard (LAL)
        Slides
      • 33
        Intermediate beta configurations at the IP for commissioning and optimisation
        Speaker: Ms Sha Bai (IHEP/LAL)
        Slides
      • 34
        Discussion
    • 15:30
      coffee break Seminar Hall, 3-Go-Kan

      Seminar Hall, 3-Go-Kan

      KEK

    • FD support system Seminar Hall, 3-Go-Kan

      Seminar Hall, 3-Go-Kan

      KEK

      LAPP table with "QC3" magnets and initial alignment
      Rigid support for BSM and initial alignment
      Monalisa system

      • 35
        FD support study at Annecy; schedule
        Speaker: Dr Andrea Jeremie (LAPP)
        Slides
      • 36
        Shintake monitor support
        Speaker: Dr Tatsuya KUME (KEK)
        Slides
      • 37
        Monalisa system: status, progress
        Speaker: Dr David urner (University of Oxford)
        Slides
      • 38
        Discussion
    • Installation Schedule Seminar Hall, 3-Go-Kan

      Seminar Hall, 3-Go-Kan

      KEK

      Magnet, vacuum system, utility
      Instrumentation
      - FONT; FB, FF and ZC systems, nBPM- and IPBPM-triplets, Laser-wire
      - MonaLisa, Stable FD Table, new Shintake monitor, Carbon wire scanner, Honda monitor

      • 39
        Carbon Wire Scanner
        Speaker: Doug McCormick (SLAC)
        Slides
      • 40
        Shintake Monitor
        Speaker: Dr Yoshio Kamiya (ICEPP, The University of Tokyo)
        Slides
      • 41
        IP BPM + Honda monitor
        Speaker: Dr Yosuke Honda (KEK)
        Slides
      • 42
        FD Table
        Speaker: Dr Andrea Jeremie (LAPP)
        Slides
      • 43
        S-band BPM production
        Speaker: Eunsan Kim
        Slides
      • 44
        S-band BPM electronics
        Speaker: Dr Stewart Boogert (Royal Holloway, University of London)
      • 45
        Mona Lisa
        Speaker: Dr David urner (University of Oxford)
        Slides
      • 46
        Laser Wire
        Speaker: Dr David Howell (Oxford)
        Slides
      • 47
        FONT
        Speaker: Prof. Philip Burrows (Oxford University)
        Slides
    • Long Term Plan Seminar Hall, 3-Go-Kan

      Seminar Hall, 3-Go-Kan

      KEK

      • 48
        Superconducting Final Focus for ATF2
        Speaker: B. Parker
        Slides
      • 49
        Permanent magnet Final Focus Quadrupole for ATF2
        Speaker: Y. Iwashita
        Slides
      • 50
        R&D for photon colliders and related issues at ATF2
        Speaker: T. Takahashi
        Slides
    • 11:00
      coffee break Seminar Hall, 3-Go-Kan

      Seminar Hall, 3-Go-Kan

      KEK

    • 51
      Group Photo in front of Seminar Hall ( inside )

      in front of Seminar Hall ( inside )

      KEK

      The place is changed to inside the building since there is too strong sun light outside, i.e. in front of 3-go-kan.
      pictures
    • 11:05
      coffee break Seminar Hall, 3-Go-Kan

      Seminar Hall, 3-Go-Kan

      KEK

    • Summary Seminar Hall, 3-Go-Kan

      Seminar Hall, 3-Go-Kan

      KEK

      • 52
        Conventional facilities and construction schedule
        Speaker: Nobuhiro Terunuma (KEK)
        Slides
      • 53
      • 54
        Instrumentation
        Speaker: Mr Justin May (SLAC)
        Slides
      • 55
        Magnet, mover and alignment
        Speaker: Dr Cherrill Spencer (SLAC)
        Slides
      • 56
        Power supply
        Speaker: Briant Lam (SLAC)
        Slides
      • 57
        FD support
        Speaker: Dr David urner (University of Oxford)
        Slides
      • 58
        Commissioning and Tuning
        Speaker: Philip Bambade (Laboratoire de l''Accelerateur Lineaire (LAL) (IN2P3) (LAL))
        Slides
      • 59
        Installation schedule
        Speaker: Nobuhiro Terunuma (KEK)
        Slides
      • 60
        Long term plan
        Speaker: Dr Brett Parker (BNL)
        Slides
    • 12:10
      lunch Seminar Hall, 3-Go-Kan

      Seminar Hall, 3-Go-Kan

      KEK

    • Fifth TB and SGC Joint Meeting Seminar Hall, 3-Go-Kan

      Seminar Hall, 3-Go-Kan

      KEK

      slides
    • 18:00
      Banquet ( Forget-The-Year Party ) Seminar Hall, 3-Go-Kan

      Seminar Hall, 3-Go-Kan

      KEK