The purpose of this meeting is to review the work on the ATF2 project and on selected MDI topics done jointly by the three IN2P3 groups at LAL-Orsay, LAPP-Annecy and LLR-Polytechnique and by the Japanese groups at KEK and Tokyo University. The topics covered are beam tuning and optimisation, participation in beam phase-space measurements being planned in current extraction line, GEANT4 modeling of the beam line and simulations to estimate backgrounds from beam losses, ground motion modeling and feedback, stable support of the final doublet and IP measurement equipment, laser controled alignment reference, related beam instrumentation. The meeting agenda will revolve around these topics to review the current activities and status in each. Since many of these topics are also done in collaboration with other colleagues in the UK, Spain, at SLAC and at CERN, participation is encouraged from members of the corresponding groups, directly or via phone/webex connection. Sessions with Japanese phoning in will be 9-12am (4-7pm in Japan). Sessions with SLAC phoning in will be 3-6pm (6-9am at SLAC), or possibly a bit later for convenience. The detailed agenda is being prepared at present and will appear below.
ATF/ATF2 research program and present orientations at KEK for ILC30m
Speaker:
Prof.Junji Urakawa(KEK)
Slides
09:30
ATF2 project status30m
Speaker:
DrToshiaki Tauchi(KEK)
Slides
10:00
Overview of IN2P3 contribution on ATF2 and goals for 2007-201030m
Speaker:
Philip Bambade(Laboratoire de l''Accelerateur Lineaire (LAL) (IN2P3) (LAL))
Slides
10:30
→
11:00
Coffee break
30m
11:00
→
12:30
IP stable supports 1
11:00
Detailed geometry around the IP20m
Speaker:
DrToshiyuki Okugi(KEK)
Slides
11:20
Shintake monitor: status, new optics, fringe stability monitor20m
Speaker:
MrTakashi Yamanaka(The University of Tokyo)
Slides
11:40
Shintake monitor: design of rigid support20m
Speaker:
DrTatsuya KUME(KEK)
Slides
12:00
Stable support for FD: measurement update with FFTB movers and weights, computerised drawings, status of new TMC table purchase and overall design considerations30m
Speaker:
DrAndrea Jeremie(LAPP)
Slides
12:30
→
14:00
Lunch break
1h 30m
14:00
→
16:00
IP stable supports 2
14:00
Visit of the CLIC table measurement setup20m
Speaker:
DrAndrea Jeremie(LAPP)
14:20
Discussion following morning session20m
14:40
Monalisa developments and plans for ATF220m
Speaker:
DrDavid urner(University of Oxford)
Slides
15:00
Stable support for FD: plans for installation and characterisation at KEK in 200820m
Speaker:
DrAndrea Jeremie(LAPP)
Slides
15:20
Shintake monitor: installation and commissioning schedule20m
Speaker:
MrTaikan SUEHARA(The University of Tokyo)
Slides
15:40
Overall discussion and plans20m
15:10
→
18:10
SLAC session 1
15:10
Effect of non-linearity in ATF EXT shared magnets20m
Speaker:
Maria del Carmen Alabau(IFIC (Valencia) - LAL (Orsay))
Slides
15:30
Extraction bumps and emittance studies for the ATF using pulsed magnets20m
Speaker:
DrRob Appleby(University of Manchester)
Slides
15:50
Measurement of resonance driving terms in the ATF damping ring20m
