ILC ML & SCRF Baseline Technical Review (ML & SCRF BTR)
→
Japan
The 4th Building Seminar Hall (KEK Tsukuba)
The 4th Building Seminar Hall
KEK Tsukuba
1-1 Oho, Tsukuba, 305-0801, Japan
Description
The meeting is to be organized as a step for the ILC Global Design Effort (ILC-GDE) to reach the Technical Design Report by the end of 2012.
The GDE project management and KEK Linear Collider Office will co-chair the meeting
to coordinate the ILC ML & SCRF Baseline Technical Review (ML & SCRF BTR).
Participants
-
- 9:00 AM → 10:15 AM
-
10:15 AM
→
10:45 AM
Meeting Photo/Coffee/Tea 30m
-
10:45 AM
→
12:15 PM
ML IntegrationConvener: Chris Adolphsen (SLAC)
- 10:45 AM
- 10:55 AM
- 11:20 AM
- 11:35 AM
-
11:55 AM
Comments from Cost Group 10mSpeaker: Gerald Dugan (Cornell University)
-
12:05 PM
Discussion 10m
-
12:15 PM
→
1:30 PM
Lunch 1h 15m
-
1:30 PM
→
3:15 PM
HLRF/LLRF
- 1:30 PM
- 2:00 PM
- 2:15 PM
-
2:30 PM
Tunable power distribution system 10mSpeaker: Chris Nantista (SLAC)
-
2:40 PM
AC power and cooling requirements 10mSpeakers: Chris Nantista (SLAC), Shigeki Fukuda (KEK)
-
2:50 PM
Comments from Cost Group 5mSpeaker: Gerald Dugan (Cornell University)
-
2:55 PM
Discussion 20m
-
3:15 PM
→
3:45 PM
Coffee/Tea 30m
-
3:45 PM
→
5:45 PM
Cryomodule Fabrication and AssemblyConvener: Paolo Pierini (INFN Milano LASA)
- 3:45 PM
-
4:15 PM
CM-string configuration matched to TDR RF-unit 20m
-
4:35 PM
Simplification of 5K radiation-shield, accessibility, flow reversal or not 15m
- 4:50 PM
-
5:05 PM
Alignment scheme with EXFEL approach 10m
-
5:15 PM
Comments from Cost group 10mSpeaker: Gerald Dugan (Cornell University)
-
5:25 PM
Discussion 20m
-
- 8:00 AM → 9:00 AM
-
9:00 AM
→
9:40 AM
CryogenicsConvener: Mr Tom Peterson (FNAL)
- 9:00 AM
-
9:15 AM
Capacity optimization and heat balance with crymodule heat-load 10m
-
9:25 AM
Comments from Cost Group 5mSpeaker: Gerald Dugan (Cornell University)
-
9:30 AM
Discussion 10m
-
9:40 AM
→
10:00 AM
Coffee/Tea 20m
-
10:00 AM
→
12:15 PM
Cavity Integration, and Cavity/CM performance testsConvener: Hitoshi Hayano (KEK)
-
10:00 AM
Cavity envelope/interface 30m
- 10:30 AM
-
11:00 AM
Cavity delivery condition with LHe-tank 15m
-
11:15 AM
Power coupler conditioning strategy 15m
- 11:30 AM
-
11:45 AM
Comments from Cost Group 10mSpeaker: Gerald Dugan (Cornell University)
- 11:55 AM
-
10:00 AM
-
12:15 PM
→
1:30 PM
Lunch 1h 15m
-
1:30 PM
→
3:00 PM
Cavity gradientConvener: Dr Rongli Geng (Jefferson Lab)
- 1:30 PM
- 1:55 PM
- 2:10 PM
-
2:30 PM
How to overcome the gradient degradation in operation? 20mSpeaker: Akira Yamamoto (KEK)
-
2:40 PM
Discussion 20m
-
3:00 PM
→
3:30 PM
Coffee/Tea 30m
-
3:30 PM
→
5:45 PM
General Discussions and conclusionConvener: Nicholas Walker (DESY)
-
3:30 PM
Current status for SCRF costing overview 30mSpeaker: Gerald Dugan (Cornell University)
- 4:00 PM
- 4:45 PM
-
5:15 PM
Closing remarks 15mSpeakers: Dr Barry Barish (GDE), Dr Marc Ross (FNAL)
-
3:30 PM