3rd T4CM - Type IV ILC Cryomodule Meeting

Europe/Zurich
INFN Milano - Laboratorio LASA

INFN Milano - Laboratorio LASA

Via Fratelli Cervi, 201 20090 Segrate (MI) Italy
Carlo Pagani (INFN Milano LASA), Paolo Pierini (INFN Milano LASA)
Description
This is the third meeting in a series where representatives of the three ILC regions discuss the collaborative engineering effort needed towards the definition of the ILC modules.
How to reach LASA and list of Hotels
LASA SRF Group Website
Participants
  • Andrea Basti
  • Angelo Bosotti
  • Beate Glowa
  • Carlo Pagani
  • Claudia Engling
  • Daniele Sertore
  • Donald Mitchell
  • Franco Bedeschi
  • Harry Carter
  • Jasper Dammann
  • Kay Jensch
  • Lars Hagge
  • Laurent TAVIAN
  • Michael McGee
  • Nicola Panzeri
  • Norbert Welle
  • Orlov Youri
  • Paolo Michelato
  • Paolo Pierini
  • Rolf Lange
  • Serena Barbanotti
  • Thomas Peterson
  • Vittorio Parma
    • 09:00 12:30
      Mechanical aspects
      • 09:00
        T4CM Vibration Analysis Update 30m
        Speaker: Michael McGee (Fermilab)
        Slides
        Video
      • 09:30
        Report from fabrication at Zanon of the type 3+ modules 30m
        Speaker: Serena Barbanotti (INFN Milano LASA)
        Slides
      • 10:00
        Module design and R&D activities in Pisa 30m
        Speaker: andrea basti (INFN Sezione di Pisa)
        Slides
      • 10:30
        Coffee break 30m
      • 11:00
        Activities on posts at INFN and DESY 30m
        Speaker: Serena Barbanotti (INFN Milano LASA)
        Slides
      • 11:30
        Activities on posts at DESY 30m
        Speaker: Kay Jensch (DESY)
        Slides
    • 12:30 14:00
      Lunch Break 1h 30m
    • 14:00 18:00
      Cryogenic aspects
      • 14:00
        Cryomodules as Part of the ILC Cryogenic System 20m
        You can download some of the most recent documents for ILC cryogenics from http://www.linearcollider.org/wiki/doku.php? id=rdr:rdr_gs:cryogenic_systems
        Speaker: Mr Tom Peterson (FNAL)
        Slides
      • 14:20
        ILC Cryomodule Piping 10m
        Speaker: Laurent Jean Tavian (CERN)
        Slides
      • 14:30
        Cryomodule heat loads -- latest estimates 10m
        Speaker: TBD
      • 14:40
        Measuring cryomodule heat on a test stand or in a string 20m
        Speaker: TBD
      • 15:00
        Cryomodule test stands 20m
      • 15:20
        Helium flow rates and pressure drops as estimated for ILC 20m
      • 15:40
        Cryomodule operation experience at TTF 20m
      • 16:00
        Magnet cooling within the cryomodule 10m
      • 16:10
        Magnet current leads 10m
      • 16:20
        Are flow-induced vibrations a concern for ILC? 10m
      • 16:30
        Cryomodule instrumentation -- both for prototype and also in the ILC 10m
      • 16:40
        Cryomodule maximum allowable pressures for each circuit 10m
      • 16:50
        Emergency venting with loss of vacuum, spacing of vacuum breaks 10m
      • 17:00
        String end box features and issues 10m
      • 17:10
        Possible trade-offs of cryomodule complexity with refrigeration size (do we need to worry about every Watt? Or is there a beneficial trade-off with some simplification of MLI, etc.) 10m
    • 09:00 12:30
      Discussion on task assignements

      The purpose of this session is to finalize the task list
      and assignments to the various groups.

      • 09:00
        General discussion and tasks drafting 3h 30m
    • 12:30 14:00
      Lunch Break 1h 30m
    • 14:00 18:00
      Discussion on how to proceed in further work
      • 14:00
        Round table discussion and conclusions 2h
        Speaker: TBD
      • 16:00
        Visit to LASA Laboratory 1h 30m
      • 17:30
        Adjourn 30m
        Speaker: Carlo Pagani (INFN Milano LASA)